 |
| The Shortened shaft reassembled. |
 | |
| Ready to weld. See previous post. |
 |
| Welded in multiple passes. |
 |
| I had already reassembled the shortened steering column when I found out it was too low |
 |
| The Mounting bracket removed and the remains of the spot welds ground down. |
 |
| Here's how the column hung after shortening |
 |
| You can see that the angle of the steering column isn't right. Too low. |
 |
| Blair 3/8" spot weld cutter. The only to cut spot welds. |
 |
| The 1/4" pads I welded in place to lift the column up. With a sander I contoured these a bit before welding the mounting bracket back on. |
No comments:
Post a Comment