If you are thinking of converting an older ford truck from
the Armstrong type manual steering to power steering an excellent source of
information is here http://www.fordification.com/tech/technical-index.htm
See one of my previous posts about the subtle differences that I has to make to
the mods suggested by fordification. This post is to add some detail like the
fitting sizes needed and the recommendation that your run a power steering
fluid cooler or heat sink on the return side which apparently helps prevent the
lower seal leakage issue that a lot of these steering boxes eventually develop. |
| The cooler I Got from Summit for $29 |
 | |
| The fittings for the pump to box hookup. |
No comments:
Post a Comment